Energy Saving Lamp Tubes

Energy Saving Lamp Tubes

Model No.︰TL5

Brand Name︰Wonpro

Country of Origin︰China

Unit Price︰-

Minimum Order︰1000 pc

Inquire Now

Product Description


TL5 product specification:

Model No.

Voltage/

Frequency

Electrical Current(mA)

 

Wattage

 

 

Power Factor

 

 

Ra

 

Lumen
2700K  4000K 6500K

Average Life(h)

Weight(g)

Dimension

(L×W×H)(mm)

Quantity

/Carton

Carton Size

(L×W×H)(mm)

1×TL5-8W

220240V 50/60Hz

60

8W

>0.6

>80

490

470

450

8000

150

295×25×42

20

365×150×205

1×TL5-14W

220240V 50/60Hz

100

14W

>0.6

>80

1100

1050

1000

8000

190

556×25×42

20

625×150×205

1×TL5-21W

220240V 50/60Hz

150

21W

>0.6

>80

1870

1790

1700

8000

260

856×25×42

20

925×150×205

1×TL5-28W

220240V 50/60Hz

130

28W

>0.95

>80

2530

2420

2300

8000

360

1156×25×42

20

1225×150×205



Product Characteristic:

1.High efficiencysaving energy more than 40%.

2.One-step connection and effortless installation.

3.Instant flicker free operation over a side voltage range.

4.Easy to link-push-fit trunking enables swift light-lines

5.Integrated true color lamp module that does not need any replacement.

6.Low temperaturesaving air conditioning energysaving energysaving money and non pollution.

7.Make articles colorfultruly and high visibility below lighting.

8.Various purposesusing in primary lighting, assistant lighting, indirect lighting, floor lighting, cabinet lighting, shown-cabinet lighting, kitchen table-lighting, indoor decorative lighting, emergency lighting and so on.

 

Install/Caution

Please read this manual carefully before using the product.

Please keep the manual for reference later.

The manufacturer will not be held responsible for improper usage or modifications of the product.

The recommended maximum number of battens linked together is ten.

Please keep a space of at least 0.5m between lamp source and any combustible object. 

Operation Instruction

Do not use the product in outdoor environments.

The product is suitable for ceiling, wall & suspension mounting.

Do not use in supply voltage exceeding 220V~240V±10% for extended periods.

Please don’t use this product together with a dimming device, electronic switch or remote control.

Please don’t use mains power cable or jack cable which are not offered as accessories by SEE.

Do not touch the lamp when the power is switched on or few minutes after switching off.

Do not place readily flammable material near the lamp.

In case of operation failure, please switch off the power.

Attention:

Please shut off the power supply before changing the product or connection!

Product Image